Stay In Touch
Be the first to know about new arrivals and promotions
Electrician Pukekohe
Electrician in Pukekohe for Homes, Businesses and Lifestyle Blocks
Advanced Electrical NZ is a local electrical contractor serving Pukekohe and the wider Franklin district. We handle fault finding, electrical repairs, switchboard upgrades, lighting, rewiring, new build and renovation wiring, and EV charger installation for homes and businesses.
If something has stopped working, is tripping or smells hot, call 022 041 4630. You’ll talk to an electrician who can tell you whether it needs someone today or can be booked in, and roughly what’s involved.
All work that needs certifying comes with the right paperwork, so you have a record for your insurer, council and anyone who buys the property later.
10
Year
Leading The Way In
Advanced Electrical
Residential Projects
0
+
Commercial Projects
0
+
Customer Satisfaction
0
+
What does an electrician in Pukekohe do?
An electrician installs, repairs, tests and certifies the wiring and electrical equipment in a building. Around Pukekohe that covers a wide mix: older homes near the town centre, new builds in Paerata and Drury, shops and workshops, and lifestyle blocks with sheds and pumps.
Here’s what we do most often.
Residential electrician services
Power point installation, extra outlets and USB power points Indoor and outdoor lighting, including LED downlight upgrades Security lighting and sensor lights for driveways and paths Smoke alarm installation, including for rental properties Appliance installation: ovens, cooktops, rangehoods and heat pump wiring Rewiring older homes, in part or in full Renovation electrical work, from a new kitchen to a full extension New build electrical work, from pre-wire to final fit-off
Commercial electrician services
For shops, offices, warehouses and workshops we handle fit-outs, extra circuits, lighting upgrades, data cabling, electrical maintenance and fault finding. We can work around trading hours so your business stays open.
Rural and lifestyle properties
Many properties around Franklin need more than a standard house. We wire sheds and garages, run supply to outbuildings, connect water pumps and install outdoor and security lighting over longer distances.
When do you need an emergency electrician in Pukekohe?
Call an electrician straight away if you smell burning, see scorch marks or sparks, find a switch or outlet that’s hot to touch, or someone gets a shock. The same goes for a main switch or RCD that trips again every time you reset it.
If you smell burning or see smoke, turn off the main switch only if you can do it safely. If there’s a fire, call 111 first.
For a power cut, run through these checks before you call:
- Check your neighbours. If the whole street is out, it’s a network outage. Check your line’s company’s outage page; Counties Energy covers most of Franklin.
- Look at your switchboard. Find any RCD or circuit breaker that has flipped to the off position.
- Unplug appliances on that circuit, then reset the switch once.
- If it trips again, leave it off. Something on that circuit has a fault. Call us on 022 041 4630.
A circuit that keeps tripping is protecting you from a fault. Taping a switch on or swapping in a bigger fuse removes that protection.
Why does my power keep tripping?
In most cases, a tripping switch means an RCD or circuit breaker is doing its job. It has detected current leaking to earth, a circuit drawing too much, or a short circuit. The cause is usually one appliance, moisture or ageing wiring.
What you notice | Likely cause | What to do |
Trips when one appliance is switched on | Faulty appliance, often a kettle, heater or oven element | Unplug it and reset. If the power stays on, have the appliance checked or replaced |
Trips during or after rain | Water in outdoor power points, lights or underground cables | Leave that circuit off and book fault finding |
Trips at random, with nothing new plugged in | Deteriorating wiring, a loose connection or a failing RCD | Book electrical fault diagnosis |
Lights flicker or dim | Loose connection at a switch, fitting or the switchboard | Book a check soon, as loose connections can overheat |
Fuse wire keeps blowing | Too much load on an old rewireable fuse | Spread the load and ask about a switchboard upgrade |
Our fault finding works through the circuit methodically with test equipment until we find the actual cause, rather than just resetting the switch and leaving.
The Advanced Electrical NZ Difference
Experienced Electricians
Skilled, certified and experienced in all types of electrical work.
Quality Workmanship
We take pride in delivering high-quality, lasting results..
Fast Response
Skilled, certified and experienced in all types of electrical work.
Safety First
Your safety and peace of mind is our top priority.
Common electrical problems and how we fix them
These are the problems Pukekohe homeowners call us about most, apart from tripping power.
A power point has stopped working
Likely cause: a tripped RCD, a loose connection behind the outlet, or a worn-out socket.
Fix: check your switchboard first. If nothing has tripped, we test the circuit, tighten or replace the connection, and fit a new outlet if the old one is worn.
A switch or power point feels hot or looks discoloured
Likely cause: a loose or corroded connection, or too much load on one outlet.
Fix: stop using it and call us soon, because this can start a fire. We replace the fitting, check the wiring behind it and add outlets if the circuit is overloaded.
LED downlights flicker, buzz or keep failing
Likely cause: a dimmer that isn’t compatible with LEDs, or poor-quality drivers.
Fix: we fit an LED-rated dimmer and replace failing lights with quality fittings that suit the circuit.
Not enough power points
Likely cause: older homes were wired for far fewer appliances than we use now.
Fix: instead of chaining multiboxes, we add power points where you need them, including USB outlets, and check the circuit can carry the extra load.
Smoke alarms chirping or going off for no reason
Likely cause: a low battery, dust inside the sensor, or an alarm past its replacement date (usually 10 years).
Fix: we replace old units with photoelectric alarms with long-life batteries, or hard-wired, interconnected alarms.
Tingles or mild shocks from a tap, appliance or metal fitting
Likely cause: an earthing fault or damaged wiring.
Fix: treat this as urgent. Stop using the appliance, turn off the circuit if you can do it safely, and call 022 041 4630. We find and fix the fault and test the earthing system.
Old wiring in an older home
Likely cause: rubber-insulated cable from before the 1960s becomes brittle and can crack inside the walls.
Fix: we inspect the wiring and tell you whether you need a partial or full rewire, and which rooms to do first.
Call Us Today at 0220414630 We are 24/7 Available for you.
When should you upgrade your switchboard?
Upgrade your switchboard if it still uses ceramic fuses with fuse wire, has no RCD protection, or doesn’t have room for the circuits you now need. These are the signs we see most often in Pukekohe homes:
- Rewireable fuses instead of circuit breakers
- No RCDs, or only one covering part of the house
- Scorch marks, a warm smell or buzzing from the board
- Fuses that blow or breakers that trip often
- An asbestos-backed or timber-mounted board in an older home
- No spare space for an EV charger, heat pump, spa or solar
A modern switchboard with RCD protection cuts power within a fraction of a second when it detects current leaking to earth, which greatly reduces the risk of a fatal shock. It also makes faults quicker to find, because each circuit is clearly labelled and protected separately.
How much does an electrician cost in Pukekohe?
The cost depends on how long the job takes, the materials needed, and whether the problem is known or still has to be found. We give a fixed quote for clearly defined work, such as a switchboard upgrade or lighting install. Fault finding is usually charged by time, because nobody knows how long it takes until the cause is found.
What affects the price:
- Access: high ceilings, tight roof spaces and no underfloor space all add time
- Age of the wiring: older wiring can need extra work to meet current standards
- Materials: fittings, cable runs and equipment such as EV chargers vary widely
- Timing: urgent after-hours call-outs cost more than booked work
Send photos of the job when you get in touch. They often let us give you a firmer price before we visit.
What paperwork should you get from your electrician?
In New Zealand, a licensed electrician must give you a Certificate of Compliance (CoC) for most electrical work they do on your property. Once that work is connected, you should also get an Electrical Safety Certificate (ESC) confirming it’s safe to use. Some higher-risk work, such as a new switchboard, also needs an independent inspection.
Keep both. Insurers may ask for them after a claim, and buyers’ lawyers often request them when you sell.
You can check any electrician’s licence on the Electrical Workers Registration Board’s public register. It takes about a minute, and you should do it whoever you hire, including us.
Areas we cover around Pukekohe and Franklin
We work across Pukekohe, the Franklin district and South Auckland. The type of work changes as you move around the area:
Area | Jobs we see often |
Pukekohe | Fault finding, switchboard upgrades, rewiring older homes, shop maintenance |
Paerata and Drury | New build electrical work, EV chargers, extra power points and lighting |
Karaka, Ramarama and Bombay | Lifestyle blocks: sheds, pumps, gate and security lighting |
Tuakau, Patumahoe and Buckland | Rural supply, outbuildings, older-home repairs |
Waiuku | Residential repairs, renovations, light commercial work |
Not sure if you’re in our area? Call 022 041 4630 and ask.
Why choose Advanced Electrical NZ?
- Licensed and registered. Advanced Electrical NZ is a registered electrical company in Auckland
- Certified work. You get a CoC and ESC for every job that requires them.
- Clear quotes. We explain what’s included before we start, and tell you if anything changes.
- Tidy work. We clean up, label your switchboard and explain what we did.
- Local. We serve in local Pukekohe
How to book an electrician in Pukekohe
- Get in touch. Call 022 041 4630 or use the quote form. Add photos if you can.
- Get a price. We give a fixed quote for defined jobs, or explain how fault finding is charged.
- Book a time. We agree on a time that works for you, or come out sooner for urgent faults.
- Job done and certified. We complete the work, test it, and send your paperwork.
Need an electrician in Pukekohe?
Call 022 041 4630 to talk through the job, or send a quote request with a few photos. We’ll tell you what’s involved and when we can be there.
Need an Electrician in Your Area?
Get reliable electrical services from the Advanced Electrical NZ team.